Zooz 800 Series Z-Wave Long Range GPIO Module ZAC93 LR (Use with Home Assistant Yellow or Raspberry Pi)

NOTE: Home Assistant Yellow or Raspberry Pi and home automation software required to build a Z-Wave gateway. Sold separately.

SPECIFICATIONS:

• Model Number: ZAC93 LR
• Z-Wave Signal Frequency: 908.42 MHz
• Power: 3.3 VDC
• Z-Wave Range: Up to 1 mile in open space with Z-Wave Long Range enabled
• Operating Temperature: 14-104° F
• Installation and Use: Indoor only
• Dimensions: 1.1″ x 1.1″

SDK: 7.18
READ BEFORE YOU BUY: The GPIO module is for advanced Home Assistant and home automation users only, NOT for beginners. You must be comfortable with programming and have expert computer and Z-Wave knowledge to use this device.
NEW 800 SERIES Z-WAVE LONG RANGE: Take advantage of the latest wireless innovation with Z-Wave Long Range that extends your network coverage up to a mile. NOTE: Your home automation software needs to support the Long Range implementation on the interface side as well as the end Z-Wave device you add to the network for the Long Range functionality to be fully unlocked.
WHAT YOU NEED: This 800 Series Long GPIO module adds Z-Wave Plus and Z-Wave Long Range capability to your DIY smart home set-up on a Raspberry Pi or Home Assistant Yellow hardware (sold separately). You’ll need a home automation software of your choice (not included) to complete the system.
Z-WAVE SET-UP: Follow the detailed instructions from the QR in the manual to install your module and refer to the Home Assistant / Z-Wave JS documentation to set up your Z-Wave integration according to the recommended method. Supports OTA firmware updates and and all of the latest Z-Wave library commands.