PoE Texas – PoE Injector – 12 Port Gigabit Passive Midspan Injector with 48V 120 Watt UL Power Supply – Power Over Ethernet for 802.3af or at (PoE+) Devices VoIP Phone, WiFi Access Point, IP Camera

Product Description

About PoE Texas

PoE Texas has delivered Power over Ethernet solutions that expand the potential of your IT infrastructure without replacing it. With more than 150 products designed to integrate with existing network technology, PoE Texas has made the promise of PoE accessible to businesses all around the world from our headquarters in Austin, Texas. Our top-rated team of PoE experts work with companies of all types to deliver smart buildings for lighting and automation, displays, infrastructure, and anything else in need of intelligent power.

Power up to 12 IP cameras, desktop VoIP phones, WiFi access points, or other low voltage devices through a network data cable using this Power over Ethernet (PoE) injector. This passive PoE midspan injector is designed to deliver the same voltage as its power source across 3 sets of 4 ports. The kit includes a 48-volt, 120-watt power supply compatible with IEEE 802.3af or at (PoE+) devices. Only suitable for the newer 802.3bt standard when configured with a second power supply.

Save Big on Network Upgrades and Device Installations

Power over Ethernet delivers power 328 feet from the PoE injector, eliminating the expense and hassle of installing AC power near your powered device. Use this midspan injector to add PoE to an existing ethernet cable: 1 data port in + 1 PoE port out. Or you can use the injector to increase the amount of PoE available to network devices downstream, without altering your upstream PoE switch equipment or network configuration. Our PoE injector adds power, but unlike a switch, does not manage data. Each “PoE out” port has its own “Data In” port with a total of 12 + 12 available on the multi-port unit.

Simplify & Declutter Your Setup

Our midspan injector offers an array of PoE out ports all together in a single module for wide versatility and flexibility in system installations. Instantly add PoE to any switch. Benefit from a cost-effective and efficient way to power multiple devices without changing your network configuration. Use this 12 port, rackmount midspan PoE injector for IEEE 802.3af or at 48 volt PoE applications. Eliminate clutter in your setup and extend power up to 328 feet (100 meters) distance from the source.

Replace up to 12 individual PoE injectors and condense your installation into a single, gigabit PoE module with 10/100/1000 Mbps data operation. Simplify your setup with all your data ports (In) and all your PoE ports (Out) housed together in one convenient, streamlined unit. With indicator lights for each port cluster – green for normal operation and red for maximum current – monitoring power consumption is straightforward and obvious. Although it lacks rear attachment points for power wire management, a clean setup can be achieved using sticky squares and zip ties, or you can conveniently pair with our PS-Tray accessory.

More PoE for Compatible Devices

WiFi Access Points (including Meraki, Ruckus, Linksys)VoIP Phones (such as Polycom, Cisco, Yealink)IP Cameras (Swann, Lorex, Reolink)UniFi and Ubiquiti devices (USG, Pro AP, CloudKey gen2)Raspberry PiAT&T Optical Network Terminal

Our PoE injector allows you to connect your PoE-enabled device to your existing non-PoE switch or the networking hardware with the other features you need like a non-PoE LAN switch port. Now you don’t have to sacrifice your network performance or pay significantly more just to have the right PoE. The injector plugs into an end device to deliver power, while the device also receives data from the switch upstream.

Or another scenario is when you need more PoE power in your network, but are happy with the existing switch. The midspan injector allows you to simply add PoE – or add more PoE – to your network, without changing out the switch. Avoid tearing out your whole network infrastructure: all the settings, all the configurations, and everything you built, when you can simply add the required PoE using our injector.

As your demand for higher power per port increases, our 12 port injector offers a cost-effective and system-efficient solution while saving IT administrators money.

Cooler. Quieter. More User-Friendly.

It’s a cost-effective, sturdy, and beginner-friendly solution that runs cool and quiet compared to the heat and noise given off by traditional PoE switches. Before purchasing, we recommend verifying the voltage requirements of your devices and calculating the total wattage to ensure compatibility and load capacity.

As an “always on” PoE solution, it’s critical to make sure non-PoE devices are not connected to avoid damage. With a total power budget of 120 watts, this 12-port injector is perfect for powering multiple devices simultaneously.

COMPATIBLE WITH: IEEE 802.3af or IEEE 802.3at devices with “always on” PoE at a total power budget of 120 watts

ALSO COMPATIBLE WITH: the IEEE 802.3bt if configured with a second power supply.

Mode A operation on pins 1,2(-) 3,6(+)Mode B operation on pins 4,5(+) 7,8(-)

Allows for versatile PoE applications

650 mA per port2.1mm x 5.5mm DC connectorBright LED status indicators10/100/1000 Mbps data operation1U rackmount tabs

Includes a UL Rated 48 volt, 120 watt power supplyCompatible with passive 802.3af PoE devicesTotal shared power budget = 120 wattsMax port output = 31 wattsMax device voltage = 48 volts

Instantly upgrade your network to PoE+ with our 12-port midspan injector, featuring 3 sets of 4 ports for efficient power distribution. Each set of 4 ports supports up to 120 watts, or a total power budget of 120 watts across all 12 ports. The indicator lights turn green for normal operation and red when maximum current is reached.
Provides 10/100/1000 Gigabit Data capability and transparent VLAN passthrough, enabling seamless connection of up to 12 devices such as IP cameras and VoIP phones. NOTE: Requires additional patch cables for connection from switch to injector to patch panel.
Designed for versatility, with Mode A or Mode B options compatible with IEEE 802.3af/at devices including those from Meraki, Ruckus, and more. Only compatible with the newer 802.3bt standard when configured with a second power supply (sold separately). PoE Texas offers other bundles with assorted power supplies to match your different device requirements.
Includes a 48V, 120W UL-approved power supply with a shared budget of 120 watts. Provides a cool and quiet operation compared to traditional PoE switches. A streamlined and cost-effective multi-port solution with 12 gigabit ports (Data In) and 12 gigabit PoE ports (Data + PoE Out). Remember to calculate the voltage and total wattage of your devices to ensure load capacity.
All of our PoE products are backed by a 1-Year replacement warranty and a 30-Day, no questions asked, return policy. Expert help is only a phone call away. Please call 512 479 0317 for assistance.