Gigabit Passive PoE Injector 24W POE Adapter 36-72V DC Input 24V PoE Output Converter (Not for 802.3af/at Devices) Compatible with 24V Passive Ubiquiti and Mikroik Devices

Overview:
The LNK-DC-P24G is a low cost and high efficiency solution for those requiring Passive Power over Ethernet from a 36-72VDC voltage source. They have an integrated POE injector to apply the power and data output to the CAT5/6 Ethernet cable. The output voltage is regulated and protected.
Features:
Input Voltage 36-72VDC; Output 24VDC (Passive)
Integrated Gigabit PoE Inserter; High Power 24W
High Efficiency > 85%; Nominal Frequency 50/60KHz
Support 10/100/1000Base-T, Half/Full-duplex
Over-Voltage/Load/Temperature & Short Circuit protections
Plug & Play, no configuration required
Safe and Reliable Power to WLAN Access Points
Specifications:
Connector: LAN: 1 x RJ-45 STP, “Data” Input Port
POE: 1 x RJ-45 STP, “Data + Power” Output Port
Cabling: 10/100/1000Base-T, Cat5 or above
Input Voltage Range: 36-72V DC
Output Voltage: DC 24V, 1.0A
Power Consumption: 24W max.
Power Pin Assignment: Pin 1,2 / 4,5 (+), Pin 3,6 / 7,8 (-)
Processing Type: Forward; Half-duplex, Full-duplex
Forward Filter Rate: 1,488,000pps (1000Mbps)
Maximum Distance: Cat. 5/5e/6 up to 100m (328ft)
Casing Material: Plastic Case
Operating Temperature: -10°C to 50°C (14°F to 122°F)
Storage Temperature: -20°C to 70°C
Mounting Option: Desktop
Dimensions (W×D×H): 122 x 60 x 40mm
Weight: 0.35Kg
Ethernet Standards:
IEEE 802.3 10Base-T Ethernet
IEEE 802.3u 100Base-TX Fast Ethernet
IEEE 802.3ab 1000Base-T Gigabit Ethernet
【36~72V DC Wide Voltage Input】- The passive PoE injector supports 36~72V DC input and reduce voltage to 24V PoE output. It will solve the problem that you only have 36-72V without 24V centralized power supply.
【No distinction between (+) and (-)】- There is no distinction between positive and negative poles of the gigabit PoE injector. You can connect the power supply at will, which is simple and convenient.
【Safe and Reliable Design】- The 24V PoE injector has various protections for surge, short circuit and overload. And provide power output up to 24W. Safely transmit power and data to terminal equipment.
【Compatible with Multiple Passive Devices】- The PoE adaptor is applied to security IP camera, AP and VoIP phone, fit for ubiquiti POE-25-5W, POE-24-12W, POE-24-24W, tp-link TL-PoE2412G and mikrotik 24V passive PoE devices, etc.
【Matters Needing Attention】- Once the power is supplied, there is no detection step, regardless of whether the terminal is PoE powered devices are powered, it is very easy to burn the access equipment. So you need to know your equipment.